630 Process pumps for tube elements up to 4bar

630RE twin roller pumphead for LoadSure elements

630RE twin roller pumphead for LoadSure elements

Colour display and intuitive menu structures

Colour display and intuitive menu structures

Flow rates from 0.004 L/min to 19 L/min

Flow rates from 0.004 L/min to 19 L/min

Contact us


To order this product please contact us on:

Tel: +61 (0)2 8787 1400 or +61 1300 WMB PUMPS

Fax: +61 (0)2 9729 0792

You can also send us an email or find your nearest distributor

Overview

630S and SN, 630U and UN, 630Du and DuN 630Bp and BpN, 630En and EnN pumps peristaltic process pumps fitted with RE LoadSure element pumphead for 4bar operation.

Control

Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN
Manual control                        
Intuitive keypad and color display
Choice of flowrate or speed display
Full calibration with choice of flow units
MemoDose function        
Auto restart facility
Guard switch detection
Leak detection
Remote control                        
Configurable Start/Stop, leak detector and pressure switch input via contact closure or 5V TTL or 24V industrial logic  
   
 



Configurable Start/Stop, leak detector and pressure switch input via 110V industrial logic  

   

 


Configurable Start/Stop and leak detector input via contact closure or 5V TTL or 24V industrial logic Note: Does not include pressure switch  

   

 

Direction change and auto/manual toggle input via contact closure or 5V TTL or 24V industrial logic  
   
 



Direction change and auto/manual toggle input via 110V industrial logic  

   

 

Remote operation of MemDose (foot/hand-switch or logic input)  
   

 



Four configurable digital status outputs through 24V, 30W relays  

         



Four configurable digital status outputs through 110V relays  

         

Software configurable logic outputs                    
Remote pressure/flow sensors                    
Analogue speed control                        
Fully configurable inputs; 0-10V or 4-20mA  
   
 

Analogue outputs; 0-10V, 4-20Ma            
Keypad/analogue input scaling (replacement of diaphragm pumps)                  
Tacho frequency output; 0-1478Hz                
2x sensor inputs 4-20ma*                    
Security                        
3-level PIN lock
Network communication                        
RS485 network control                    
RS232 network control                      
Digital pump commands (Profibus / EtherNet/IP)                        
Profibus DP V0                    
Communication speeds from 9.6kbit/s up to 12000kbit/s                    
Baud Rate (MBPS) 10/100 Full/Half Duplex Operation                        
Auto detect bus speed            

   
Speed set point                
Speed feedback                
Flow calibration function                
Hours run                
Revolution counter                
Leak detection                
Low fluid level alarm                
Diagnostic feedback                
EtherNet/IP            

   
Device Level Ring (DLR)                    
Flow Totaliser            

   

Performance

Flow ranges (l/min) LoadSure element tubing
  620RE (2 rollers) 620RE4 (4 rollers)
Tubuing material, tubing bore (mm) 12mm 17mm 12mm 17mm
Marprene TM, Bioprene TM 0.004-9.8 0.001-16 0.003-8.3 0.004-11
Marprene TL, Bioprene TL 0.004-9.8 0.001-18 0.003-8.3 0.005-12
Pumpsil® silicone 0.004-10 0.001-16 0.003-8.7 0.004-11
GORE STA-PURE PCS™, GORE STA-PURE PFL™, Neoprene 0.004-11 0.001-18 0.003-9.0

0.010-13

Pumphead

 620RE LoadSure tube element pumphead

620RE4 LoadSure tube element pumphead

 620R continuous tubing pumphead

620L low pulsation pumphead

Drives

Tubing

Please refer to datasheets for materials and sizes of continuous tubing and tube elements for each pumphead model.

Pumpsil platinum cured silicone tubing

Pumpsil platinum-cured silicone tubing

Bioprene thermoplastic tubing Bioprene industrial grade tubing

 

PureWeld

Watson-Marlow tubing - PureWeld

 
Marprene long life process tubing Marprene industrial grade thermoplastic elastomer tubing

 

GORE STA-PURE PCS reinforced silicone tubing GORE STA-PURE PCS pump tubing

 

GORE STA-PURE PFL reinforced fluoroelastomer tubing GORE STA-PURE PFL pump tubing

 

Neoprene industrial application tubing Neoprene tubing elements

 




Datasheet

Tubing and hoses for your industry

  • Contact us

    To order this product please contact us on:

    Tel: +61 (0)2 8787 1400 or +61 1300 WMB PUMPS

    Fax: +61 (0)2 9729 0792

    You can also send us an email or find your nearest distributor