Peristaltic pumps for science and laboratories

Pumphead options

1. 

   114DV flip-top four roller pumphead

   The 114DV single-channel pumphead assures trouble-free continuous tube loading in seconds, high accuracy and repeatable flow. It accepts 1.6mm wall tubing in bores sizes 0.5mm to 4.8mm.

   Flow rates from 0.002 to 170 ml/min at  2 bar (30 psi)

   Single-channel pumphead with four rollers for smooth flow

   Recommended for continuous duty

   Models with occlusion settings for

2. 

   102R single-channel two roller pumphead

   The 102R single-channel pumphead with two-roller rotor is suitable for continuous silicone tubing. It accepts tubing in bore sizes 0.5mm to 4.8mm.

   Flow rates from 0.003 to 54 ml/min at  2 bar (30 psi)

   Single-channel two roller pumphead

   Sprung rotor to maximise tube life

3. 

   400DM2 twin-channel pumphead

   The twin-channel 400DM2 pumphead uses three-bridge manifold tubing. Ideal for ultra-low-flow metering. Available for 120S and 120U drives.

   Flow rates from 0.0001 to 36 ml/min per channel

   Precision-machined four roller aluminium rotor

   Smooth, precise flow

4. 

   400DM3 three-channel pumphead

   The three-channel 400DM3 pumphead uses three-bridge manifold tubing. Ideal for ultra-low-flow metering. Available for 120S and 120U drives.

   Flow rates from 0.0001 to 36 ml/min per channel

   Precision-machined four roller aluminium rotor

   Smooth, precise flow

5. 

   400D1 single-channel pumphead

   The single-channel 400D1 pumphead accepts 1.6mm-wall tubing from 0.5mm to 4.0mm.

   This metering pumphead is familiar to users replacing older 101 and 400 series pumps with the 120. Suitable for 120S and 120U drives.

   Flow rates from 0.001 to 120 ml/min

   Precision-machined four roller aluminium rotor

   Quick-release sprung tube clamps

   Smooth, precise flow