To order this product please contact us on:
Tel: +44 (0) 1326 370370
You can also send us an email or find your nearest distributor
Watson-Marlow 521VI/RELC, 521I/RELC, 521F/RELC, 521FX/RELC: 0-2 bar IP55 pumps fitted with LoadSure low-pressure element pumpheads
521 close coupled pumps offer IP55 ingress protection for light industrial environments. They offer rugged, industrial pumping, with all the pumphead features of cased drives, but at the lowest whole-life cost.
520REL low-pressure LoadSure element pumphead features large swept volume with sprung rollers for high accuracy
Chemically-resistant polyphenylene sulphide track and rotor, and stainless steel rollers and bearings
Low rotational speeds greatly increase tube life and system reliability
Clutched rotor for rapid, effortless tube loading
Rugged, tool-unlockable guard
521VI Varmeca close coupled drives bring 10:1 speed control, constant torque output and total reliability to the industrial environment. The drive offers 230V and 400V three-phase power options, plus 110V and 230V single-phase. Control is by a large speed knob and forward/reverse switching.
Varmeca integral inverter offering 10:1 control ratio: 63 rpm, 220 rpm and 275 rpm maximum speeds
Stop/forward/reverse control and analogue or digital remote control. There is a PROFIBUS option
521F Fixed speed drives are three-phase powered
There is a choice of speeds: 60 rpm, 213 rpm and 291 rpm
Flow rates from 2.5 ml/min to 4,600 ml/min
Other speeds are available on request
521FX Duplex fixed speed drives have twin pumpheads allowing two channel pumping.
There is a choice of speeds: 55 rpm and 183 rpm
Flow rates to 860 ml/min from each channel
Twin 520R2C pumpheads for balanced flow in two channels
521I Inverter-controlled, variable speed drives include a stand-alone Siemens inverter to control pump speed.
Inverter can be mounted beside the pump or remotely
Three speed ranges: 6-60 rpm; 21-213 rpm; 29-291 rpm
Flow rates to 4,600ml/min
Control
| |
521F |
521V |
521P |
Industry approved motors with 2 standard gearing speeds |
• |
• |
• |
Supplied with free standing variable frequency drive (VFD) |
• |
• |
|
Speed start/stop forward/reverse keypad control with remote control features |
|
• |
|
Speed control ratio |
|
10:1 |
5:1 |
VFD input power 230/3/60, 460/3/60, 115/1/60 in either NEMA 1 or NEMA 4X |
|
• |
|
Standard integral gearmotor 3 phase 230/460V 60Hz TEFC |
• |
• |
|
Optional 115/1/60 |
• |
|
|
Optional gearbox and NEMA C motor |
• |
• |
|
Optional explosion proof (XP) motor |
• |
• |
|
Four vane pneumatic motor with speed limiting |
|
|
• |
Optional FDA approved white epoxy paint |
• |
• |
• |
Optional baseplate mounting |
• |
• |
• |
Performance
LoadSure® Element tubing flow rates, ml/min (gph) |
| Tube Material |
Speed |
3.2mm |
6.4mm |
9.6mm |
Pumpsil, Sta-Pure PFL, Neoprene |
6-57rpm |
10-105(0.2-1.7) |
40-400(0.6-6.3) |
90-905(1.4-14) |
| |
23-227rpm |
40-400(0.6-6.3) |
155-1560(2.5-24.7) |
360-3590(5.7-57) |
Marprene TL, Bioprene TL |
6-57rpm |
10-95(0.2-1.5) |
40-380(0.6-6.0) |
85-865(1.3-14) |
| |
23-227rpm |
40-380(0.6-6.0) |
155-1560(2.5-24.7) |
345-3430(5.5-54) |
Datasheet download
Manual download
521F/RELC, 521I/RELC, 521VI/RELC, 521FX/RELC
Tubing and hoses for your industry