Laboratory pump with 313D rapid load flip-top pumphead

323S/D

323S/D

Digital speed control from 3 rpm to 400 rpm in 1 rpm steps. Instantly reversible. Switchable between 100-120V or 220-240V. Rapid-loading flip-top pumpheads accepts seven tube sizes from 0.5mm to 8.0mm bore.
323

323

Speed adjusts in 1 rpm steps from 3 rpm to 400 rpm. Instantly reversible, keypad lock stops tampering or accidental changes, auto-restart for mains failure recovery, switchable between 100-120V or 220-240V 50/60Hz, two year full warranty.

Contact us


To order this product please contact us on:

Tel: +603-55699650 

Fax: +603-55699656 

You can also send us an email or find your nearest distributor

Overview

323/D analog and manual control pumps datasheet

323/D analog and manual control pumps datasheet

Download now

Benchtop pumps with manual, remote, analogue and RS232 control. The 323 is controlled with a membrane keypad and digital LCD displays speed. There are four models with increased degrees of functionality:

323Du RS232/auto/manual enhanced-control high-flow pumps

323U and 323U analog-auto and enhanced manual-control pumps

323S high-performance manual control pumps

323E manual control pumps

Key features include:

313 pumpheads for higher flows, 314 for lower pulsation

313D and 314D pumpheads accept 1.6mm wall tubing

313D2 and 314D2 pumpheads accept 2.4mm wall tubing

313D and 313D2 pumpheads for flow rates up to 2000 ml/min

314D and 314D2 pumpheads for flow rates up to 1600 ml/min

Thick (2.4mm) wall tubing provides stable flow performance with viscous fluids, or against higher delivery pressures up to 2 bar (60 psi) or more demanding suction conditions. Because handling thicker wall tubing demands more torque, extension pumpheads may not be fitted to 313D2 or 314D2 pumpheads.

Control

  

Performance

 

Pumphead

Single channel pumpheads extendable up to six heads depending upon drive type and tubing bore size. Flip-top design, ensuring easy cleaning and ultra-fast setup

313D and 314D pumpheads accept 1.6mm wall tubing

313D2 and 314D2 pumpheads accept 2.4mm wall tubing

313D and 313D2 pumpheads for flow rates up to 2000 ml/min

314D and 314D2 pumpheads for flow rates up to 1600 ml/min

Pumpheads accept five tube sizes from 1.6mm to 8.0mm bore

Drives

Benchtop pumps with manual, remote, analogue, RS232 control. It features a chemically resistant ABS top and IP31 protection. The 323 is controlled with a membrane keypad and digital LCD displays speed. There are four models with increase degrees of functionality.

Upto 133:1 enhanced digital manual speed control

Manual or remote 4-20mA or 0-10V analogue auto-control or  RS232 control commands.

MemoDose facility for accurate single shot dosing

Two-year warranty

Digital TTL inputs for run/stop and direction

Instantly reversible

Keypad lock prevents tampering or accidental changes

Manual download

 

Tubing and hoses for your industry

  • Contact us

    To order this product please contact us on:

    Tel: +603-55699650 

    Fax: +603-55699656 

    You can also send us an email or find your nearest distributor