  | Low flow single channel pumps.
Fixed and manual/auto control variable speed.
- Flow rates from 1µl/min to 53ml/min
- Rapid and simple tube loading
- Manual, auto and digital TTL control
|  |
 | Near pulseless, multi-channel cassette pumps with up to 32 channels.
- Flow rates from 0.6µl/min to 22ml/min per channel
- Precise flow control for each individual chanel
- Manual, auto and digital TTL control
|  |
 | NEW
Single or multi-channel benchtop pumps with manual, remote, analogue, RS232 control and accurate dispensing.
- Flow rates from 2µl/min to 3 litre/min
- High visibility digital display with membrane keypad
- Single channel or up to ten separate channels
- Zero maintenance brushless DC motors
- New 323Dz General purpose dispensing pump
|  |
 | NEW
Ultra-compact scientific pumps for low flow single ormulti-channel applications.
- Flow rates from 1µl/min to 610 ml/min
- Precision multi-roller pumpheads for accurate flows
- Single channel 102R pumphead for use with Silicone or Marprene tubing
- Digital and analogue process signal control
|  |
 | NEW
Superb range of IP31 and IP66 rated pumps for science and industry as well as fixed and variable speed close-coupled pumps.
- Flow rates from 10µl/min to 4.4 litre/min
- Manual, analogue and digital RS232/RS485 control
- ATEX rated, three phase and pneumatic drives
- Seven pumpheads options including low-pulse high accuracy 505L
- Dosing and dispensing pump for +/- 0.5% accuracy
|  |
 | NEW
NEMA 4X mid-flow process pumps with full clean-in-place and steam-in-place capability.
- Flow rates from 0.0003 gpm to 4.8 gpm
- Manual, auto and digital control
- Close coupled pumps for the three phase operation including pneumatic and ATEX options
- One minute maintenance LoadSure elements
|  |
 | Industrial IP66 cased and baseplate mounted pumps for use with continuous tubing or new LoadSure elements. Three phase motors, ATEX rated drives or pneumatic.
- Flow rates from 0.4 gpm to 17.4 gpm
- Single or twin channel operation
- Driven roller pumphead extends tube life
- LoadSure elements ensure correct tube loading every time
- Fixed or variable speed drives
|  |
 | High-flow hygienic pumping using USP Class VI Bioprene tubing or STA-PURE tubing.
- Flow rates from 0.5 gpm to 35 gpm
- Full Clean-In-Place and Steam-In-Place capability
- Extensive motor/gearbox control options
|  |
 | High flow high-pressure industrial pumps with unique patented direct coupled design. Duplex and CIP models available.
- Flow rates from 0.08 gpm to 350 gpm
- Reinforced hoses enable pressures up to 230 psi
- Fixed and mechanically or electronically variable speed drives including ATEX versions
|  |
 | A wide range of instrument quality and industrial OEM pumpheads for fitting to users own drives, or with faceplate-mounted motor options.
- Flow rates from 0.01µl/min to 33 litre/min
- Single and multi-channel pumpheads
- Synchronous, DC, induction, shaded-pole or stepper motors
- Optional Eurocard pcb enables full controllability
|  |
 | Extensive range of tubing ensures chemical compatibility. USP Class VI and FDA approvals. Precision machined, re-inforced hoses provide flow stability and excellent suction performance.
- Twelve tubing materials in bore sizes 0.13mm to 25.4mm
- Autoclavable Marprene, Bioprene, STA-PURE, Chem-Sure and Pumpsil Silicone (platinum-cured) with LaserTraceability
- Four hose materials including Natural Rubber, Nitrile NBR, Hypalon and EPDM from 10mm to 100mm
|  |
