  |
Low flow single channel pumps.
Fixed and manual/auto control variable speed.
- Flow rates from 1µl/min
to 53ml/min
- Rapid and simple tube loading
- Manual, auto and digital TTL control
|
 |
 |
Near pulseless, multi-channel cassette
pumps with up to 32 channels.
- Flow rates from 0.6µl/min
to 22ml/min per channel
- Precise flow control for each
individual chanel
- Manual, auto and digital TTL control
|
 |
 |
NEW
Single or multi-channel benchtop pumps with manual, remote, analogue,
RS232 control and accurate dispensing.
- Flow rates from 2µl/min
to 3 litre/min
- High visibility digital display
with membrane keypad
- Single channel or up to ten
separate channels
- Zero maintenance brushless DC motors
- New 323Dz General purpose
dispensing pump
|
 |
 |
NEW
Ultra-compact scientific pumps for low flow single ormulti-channel
applications.
- Flow rates from 1µl/min
to 610 ml/min
- Precision multi-roller pumpheads
for accurate flows
- Single channel 102R pumphead for
use with Silicone or Marprene tubing
- Digital and analogue process signal
control
|
 |
 |
NEW
Superb range of IP31 and IP66 rated pumps for science and industry as
well as fixed and variable speed close-coupled pumps.
- Flow rates from 10µl/min
to 4.4 litre/min
- Manual, analogue and digital
RS232/RS485 control
- ATEX rated, three phase and
pneumatic drives
- Seven pumpheads options including
low-pulse high accuracy 505L
- Dosing and dispensing pump for +/-
0.5% accuracy
|
 |
 |
NEW
IP66 mid-flow process pumps with full clean-in-place and steam-in-place
capability.
- Flow rates from 10ml/min to 18.0
litre/min
- Manual, auto and digital network
control
- Close coupled pumps for the three
phase operation including pneumatic and ATEX options
- One minute maintenance LoadSure
elements
|
 |
 |
Industrial IP66 cased and baseplate mounted pumps for use with continuous tubing or new LoadSure elements. Three phase motors, ATEX rated drives or pneumatic.
- Flow rates from 1.6 litre/min to 4,000 litre/ hour
- Single or twin channel operation
- Driven roller pumphead extends tube
life
- LoadSure elements ensure correct
tube loading every time
- Fixed or variable speed drives
|
 |
 |
High-flow hygienic pumping using USP
Class VI Bioprene tubing or STA-PURE tubing.
- Flow rates 2 litre/min to 8,000
litre/hour
- Full Clean-In-Place and
Steam-In-Place capability
- Extensive motor/gearbox control
options
|
 |
 |
High flow high-pressure industrial
pumps with unique patented direct coupled design. Duplex and CIP models
available.
- Flow rates to 0.3 litre/min 80
cubic metres/hour
- Reinforced hoses enable pressures
up to 16 bar
- Fixed and mechanically or
electronically variable speed drives including ATEX versions
|
 |
 |
A wide range of instrument quality and
industrial OEM pumpheads for fitting to users own drives, or with
faceplate-mounted motor options.
- Flow rates from
0.01µl/min to 33 litre/min
- Single and multi-channel pumpheads
- Synchronous, DC, induction,
shaded-pole or stepper motors
- Optional Eurocard pcb enables full
controllability
|
 |
 |
Extensive range of tubing ensures
chemical
compatibility. USP Class VI and FDA approvals. Precision machined,
re-inforced hoses provide flow stability and excellent suction
performance.
- Twelve tubing materials in bore
sizes 0.13mm to 25.4mm
- Autoclavable Marprene, Bioprene,
STA-PURE, Chem-Sure and Pumpsil Silicone (platinum-cured) with
LaserTraceability
- Four hose materials including
Natural Rubber, Nitrile NBR, Hypalon and EPDM from 10mm to 100mm
|
 |
