Sample valve


Sample valve datasheet

Sample valve datasheet

Download Now

ASEPCO Weirless Radial diaphragm sample valve

Sample valve



Sample valve specifications

Material 316L, AL6XN, Hastelloy Machined from solid, hot-rolled, bar stock
Surface finish options Electropolished: Max 20 micro inch (0.5µm) Ra, Max 15 micro inch (0.375µm) Ra, Max 10 micro inch (0.25µm) Ra
Mounting Sizes Weld-in or 1 to 3 inch clamp
Inlet Size 1/2 inch
Outlet connections Standard: Hygienic clamp, tube end (others available)
Maximum pressure 10 bar (150 psig)
Maximum temperature Varies from 135C (275F) to 200C (400F) depending on diaphragm material
Marking Each valve is serialised and marked for full material traceability
ISO All product and procedures are governed by our ISO Quality Assurance Program
Standards BPE, CE-PED, ASME

Tank sampling

Tank sampling ASEPCO

Using the 4-valve rig from ASEPCO is the easiest and most reliable way to take a truly representative sample in an uncontrolled environment.


  • Autoclave a bagged sample bottle with a filter and an ASEPCO valve (V3) sealing the opening.
  • Unbag the sample bottle as shown, connecting the closed V3 to the closed tank sample Valve V2.
  • Steam behind the flow paths of V2 and V3 as shown in pink.
  • Close steam source (V1) and condensate drain (V4). You now have a sterile path between your process and your sample bottle.
  • Open the sample bottle (V3) and the tank sample valve (V2), and take your sample as shown in blue.
  • Close the sample valve (V2), then the sample receptacle valve (V3). Drain V4 (lose less than 15 ml of product with the ASEPCO close-coupled condensate valve) and remove your sample bottle.

Following these steps offers consistent, repeatable and reliable sampling at any time during the process. Using the behind-the-seat flowpath design of ASEPCO valves ensures the absolute aseptic control of your sample. 


ASEPCO actuators

The AKS actuator series** for tank valves is a durable, easy to maintain actuator made of a plastic housing and stainless steel diaphragm interface. The resulting actuator is a hygienic design which is GMP-compliant.

Our tank valve actuators are also available in the AJS actuator series an all stainless steel actuator providing all the same performance, but in a heavy-duty package.

Both versions offer manual and pneumatic options, are provided with laser-etched serial numbers for traceability, and carry a market-leading three year warranty. It is straightforward to add automation to the pneumatic versions by mounting switches or controllers from any manufacturer.

Work with all manufacturers linear switches and controllers (i.e. Westlock, Stonel, Burkert, etc.)

**AKS actuator series only available on 0.5-1.5" sizes