630 Process pumps with 620L low pulsation pumphead

Dispenses 500 ml in 2.4 seconds

Dispenses 500 ml in 2.4 seconds

630L low pulsation pumpheads

630L low pulsation pumpheads

Contact us


To order this product please contact UK Sales Support:

Phone: +44 (0) 1326 370362

You can also send us an email or find your nearest distributor.

Overview

Control

Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN
Manual control                        
Intuitive keypad and color display
Choice of flowrate or speed display
Full calibration with choice of flow units
MemoDose function        
Auto restart facility
Guard switch detection
Leak detection
Remote control                        
Configurable Start/Stop, leak detector and pressure switch input via contact closure or 5V TTL or 24V industrial logic  
   
 



Configurable Start/Stop, leak detector and pressure switch input via 110V industrial logic  

   

 


Configurable Start/Stop and leak detector input via contact closure or 5V TTL or 24V industrial logic Note: Does not include pressure switch  

   

 

Direction change and auto/manual toggle input via contact closure or 5V TTL or 24V industrial logic  
   
 



Direction change and auto/manual toggle input via 110V industrial logic  

   

 

Remote operation of MemDose (foot/hand-switch or logic input)  
   

 



Four configurable digital status outputs through 24V, 30W relays  

         



Four configurable digital status outputs through 110V relays  

         

Software configurable logic outputs                    
Remote pressure/flow sensors                    
Analogue speed control                        
Fully configurable inputs; 0-10V or 4-20mA  
   
 

Analogue outputs; 0-10V, 4-20Ma            
Keypad/analogue input scaling (replacement of diaphragm pumps)                  
Tacho frequency output; 0-1478Hz                
2x sensor inputs 4-20ma*                    
Security                        
3-level PIN lock
Network communication                        
RS485 network control                    
RS232 network control                      
Digital pump commands (Profibus / EtherNet/IP)                        
Profibus DP V0                    
Communication speeds from 9.6kbit/s up to 12000kbit/s                    
Baud Rate (MBPS) 10/100 Full/Half Duplex Operation                        
Auto detect bus speed            

   
Speed set point                
Speed feedback                
Flow calibration function                
Hours run                
Revolution counter                
Leak detection                
Low fluid level alarm                
Diagnostic feedback                
EtherNet/IP            

   
Device Level Ring (DLR)                    
Flow Totaliser            

   

Performance

Flow ranges (L/min) Y element tubing Continuous tubing
(over 0.1 to 265rpm speed range)    (flow per channel - max of 2 channels)
Tubing material 8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
Pumpsil® 0.002-4.4 0.003-8.5 0.005-11.5 0.001-2.2 0.002-4.3 0.003-5.8
Marpene®, Bioprene® 0.002-4.5 0.003-8.0 0.005-11.3 0.001-2.3 0.002-4.0 0.003-5.8
Neoprene 0.002-4.6 0.003-7.7 0.005-13.3 0.001-2.3 0.002-3.9 0.003-6.7
GORE® STA-PURE® Pump Tubing Series PFL,
GORE® STA-PURE® PumpTubing Series PCS
(620LG pumphead only) 
0.002-5.2 0.003-9.0 0.005-12.4 0.001-2.6 0.002-4.5 0.003-6.7

Pumphead

620L twin-channel pumphead

620RE4 LoadSure tube element pumphead

620RE LoadSure tube element pumphead

620R continuous tubing pumphead

Drives

Tubing

Please refer to datasheets for materials and sizes of continuous tubing and tube elements for each pumphead model.

Pumpsil platinum cured silicone tubing

Pumpsil platinum-cured silicone tubing

Bioprene thermoplastic tubing Bioprene industrial grade tubing

 

PureWeld

Watson-Marlow tubing - PureWeld

 
Marprene long life process tubing Marprene industrial grade thermoplastic elastomer tubing

 

GORE STA-PURE PCS reinforced silicone tubing GORE STA-PURE PCS pump tubing

 

GORE STA-PURE PFL reinforced fluoroelastomer tubing GORE STA-PURE PFL pump tubing

 

Neoprene industrial application tubing Neoprene tubing elements

 





Datasheet

Tubing and hoses for your industry

  • Contact us

    To order this product please contact UK Sales Support:

    Phone: +44 (0) 1326 370362

    You can also send us an email or find your nearest distributor.