ASEPCO Aseptic connectors for sample valves and instruments

ASEPCO

ASEPCO

Alternatives to hygienic clamps and Ingold ports

Contact us

To order this product please contact us on:

Tel: + 91 7030176600 or + 91 7030162233

Fax: +91 20 2293 2019

You can also send us an email or find your nearest distributor

Overview

ASEPCO close-couple aseptic connectors are alternatives to hygienic clamps and Ingold ports. They are designed to connect flush-mounted probes, instruments, and valves to tanks or inline pipes. The range builds on our patened technology and includes comprehensive sizes of ASEPCONNECT and the rapid change over and easy assembly QUICKONNECT.

ASEPCO Asepconnect

ASEPCONNECT™

 

ASEPCO ASEPCONNECT™ Inline Connectors

ASEPCONNECT™ Inline Connectors

 

 

QUICKONNECT™

QUICKONNECT™

QUICKONNECT™ Inline Connectors

ASEPTIPORT

ASEPTIPORT

ASEPCONNECT™

ASEPCO ASEPCONNECT™

The ASEPCO ASEPCONNECT™  Close-Couple Aseptic Connector

ASEPCONNECT™ Inline Connector

ASEPCO Inline Connector

ASEPCO ASEPCONNECT™ Inline Connector

QUICKONNECT™

ASEPCO QUICKONNECT™  - Vessel ConnectorsASEPCO  QUICKONNECT™ Close-Couple Aseptic Connector

ASEPCO QUICKONNECT™ Inline Connectors

ASEPCO QUICKONNECT™ Inline Connector

ASEPCO QUICKONNECT™ Inline Connectors

ASEPTIPORT family

ASEPCO AseptiPort Manifold

The ASEPCO ASEPTIPORT Probe Mount Family

Specifications

ASEPCONNECT

Material 316L, AL6XN, Hastelloy
Surface finish Max 20 micro-inch Ra (0.5 μm Ra), Electropolished, Max 15 micro-inch Ra (0.375 μm Ra), Electropolished, Max 10 micro-inch Ra (0.25 μm Ra), Electropolished
Sizes 3/8" through 4"
Thickness 1" standard height, custom heights available upon request
Connection Weld-in body with tri-clamp component connection
Design pressure

-14.5 to 101.5 psig (Maximum working pressure is determined by the design pressure of the gasket being used in the assembly.)

Design temperature -80 to 200°C (Maximum working temperature is determined by the design of the gasket being used in the assembly.)
Marking Each connector is marked for full material traceability 
ISO All product and procedures are governed by our ISO Quality Assurance Program
Standards BPE, CE-PED, ASME

 

ASEPCONNECT Inline

Material 316L, AL6XN, Hastelloy
Surface Finish Max 20 micro-inch Ra (0.5 μm Ra), Electropolished, Max 15 micro-inch Ra (0.375 μm Ra), Electropolished, Max 10 micro-inch Ra (0.25 μm Ra), Electropolished
Sizes 1.5" and 2" standard; other sizes are available on request
Connection Tri-clamp component connection
Design Pressure -14.5 to 101.5 psig (Maximum working pressure is determined by the design pressure of the gasket being used in the assembly.)
Design Temperature -80 to 200°C  (Maximum working temperature is determined by the design pressure of the gasket being used in the assembly.)
Marking Each connector is marked for full material traceability 
ISO All product and procedures are governed by our ISO Quality Assurance Program
Standards BPE, CE-PED, ASME

 

QUICKONNECT

Material 316L, AL6XN, Hastelloy
Surface Finish Max 20 micro-inch Ra (0.5 μm Ra), Electropolished - Max 15 micro-inch Ra (0.375 μm Ra), Electropolished - Max 10 micro-inch R (0.25 μm Ra), Electropolished
Sizes 3/8" through 4"
Thickness 1" standard height, custom heights available upon request
Connection Tri-clamp component connection
Design Pressure -14.5 to 101.5 psig (Maximum working pressure is determined by the design pressure of the gasket being used in the assembly.)
Design Temperature -80 to 200°C (Maximum working temperature is determined by the design pressure of the gasket being used in the assembly.)
Marking Each connector is marked for full material traceability
ISO All product and procedures are governed by our ISO Quality Assurance Program
Standards BPE, CE-PED, ASME

 

QUICKONNECT Inline

Material 316L, AL6XN, Hastelloy
Surface Finish Max 20 micro-inch Ra (0.5 μm Ra), Electropolished - Max 15 micro-inch Ra (0.375 μm Ra), Electropolished - Max 10 micro-inch R (0.25 μm Ra), Electropolished
Sizes 1.5" and 2" standard; other sizes are available upon request
Connection Tri-clamp component connection
Design Pressure -14.5 to 101.5 psig (Maximum working pressure is determined by the design pressure of the gasket being used in the assembly.)
Design Temperature -80 to 200°C (Maximum working temperature is determined by the design pressure of the gasket being used in the assembly.)
Marking Each connector is marked for full material traceability
ISO All product and procedures are governed by our ISO Quality Assurance Program
Standards BPE, CE-PED, ASME

 

AseptiPort

Material 316L, AL6XN, Hastelloy, C-22, C-276 
Surface Finish  Max 20 micro-inch Rs (0.5 μm Ra), Electropolished - Max 15 micro-inch Ra (0.375 μm Ra), Electropolished - Max 10 micro-inch Ra (0.25 μm Ra), Electropolished
Design Pressure  -14.5 to 101.5 psig (Maximum working pressure is determined by the design pressure of the gasket being used in the assembly.)
Design Temperature  -80 to 200°C (Maximum working temperature is determined by the design pressure of the gasket being used in the assembly.)
Marking  All AseptiPort probe mounts are marked for full material traceability
ISO  All product and procedures are governed by our ISO Quality Assurance Program
Standards  BPE, CE-PED, ASME

Datasheets

TBA

  • Contact us

    To order this product please contact us on:

    Tel: + 91 7030176600 or + 91 7030162233

    Fax: +91 20 2293 2019

    You can also send us an email or find your nearest distributor