Process pump for continuous tubing

Five tube materials to suit all applications

Five tube materials to suit all applications

Ultimate process security

Ultimate process security

Intuitive menu structure for rapid setup

Intuitive menu structure for rapid setup

Contact us


To order this product please contact us on:

Tel: + 91 7030176600 or + 91 7030162233

Fax: +91 20 2293 2019

You can also send us an email or find your nearest distributor

Overview

Industrial process pumps brochure

Industrial process pumps brochure

Download now

730SN, 730UN, 730DuN and 730BpN peristaltic process pumps fitted with continuous tubing pumpheads
 

Control


Functionality
720UN 720SN 720DuN

Enclosure - ingress protection rating
 NEMA 4X  NEMA 4X  NEMA 4X

Manual control
     

Keypad speed control with simple calibration to display flow
 •   •   •
Comprehensive calibration for flow rate display; metric or imperial units       •
Numeric keypad for entry of speed, flow or PIN code       •
 Cumulative volume indication       •
 Remote control      

Run/stop, direction change, auto/manual mode, leak detector input
(via contact closure or 5V TTL to 24V industrial logic
 •     •

Remote operation of MemoDose (foot/hand-switch or logic input)
 •     •

Four programmable digital status outputs through 24V, 30W relays
 •     •

Analog speed control
     

Software programmable inputs; 0-10V, 1-5V or 4-20mA
 •     •
 Analog outputs; 0-10V (8 bit resolution)  •    
 Analog outputs; 0-10V, 4-20mA (8 bit resolution)       •
 Keypad/analog input scaling (replacement of diaphragm pumps)       •

Frequency output; 0-768Hz
      •
 RS485 digital communication      

Digital network serial control
      •
 Security      

Basic security code to protect set-up
•     
 Dual operator/supervisor PIN code protection of pump settings       •

Performance

    LoadSure Tube elements bore and flow rates (litre/hr)
  Speed rpm 9.6mm 12.7mm 15.9mm 19.0mm 25.4mm
720R 0.1-360
0.12-420 0.22-780 0.30-1100 0.42-1500 0.56-2000

Pumpheads

720R and 720RX continuous tubing pumpheads

Tubing is available in five materials for almost any chemical requirement.

 

720RE and 720REX LoadSure tubing element pumpheads

Elements are available in Pumpsil platinum-cured silicone, Bioprene and STA-PURE PCS for sanitary applications; and in Marprene, Pumpsil and Neoprene.

Drives

These cased pump drives offer NEMA 4X (IP66) ingress protection for industrial and washdown environments. 

720SN is a simple, pump offering ultimate economy of ownership, with calibration and one-key manual control via a large-key membrane keypad. MemoDose provides single shot dosing

720UN is a keypad control or remote control pump with analogue speed inputs and status outputs. Software-configurable with password protection

720DuN is a sophisticated process pump with RS485 and full industrial connectivity, and process control through PC, PLC or other plant controller. Comprehensive calibration is available. Twin analogue inputs allow scaled flow adjustment. A 16-key numeric keypad with dial up flow rate or speed.

Download datasheet

720N NEMA 4X IP66   720N NEMA 4X IP66 PROFIBUS

720 R                 720RX              Profibus

Manual download

720SN/R and 720UN/R IP66   720DuN/R IP66

 720SN/R IP66                          720DuN/R IP66

PROFIBUS

No point-to-point wiring and a simple 9-pin PROFIBUS D-connector provides:

PROFIBUSProfibus GSD control file

Tubing and hoses for your industry

  • Contact us

    To order this product please contact us on:

    Tel: + 91 7030176600 or + 91 7030162233

    Fax: +91 20 2293 2019

    You can also send us an email or find your nearest distributor