530 peristaltic process pumps for tube elements, up to 4 bar

530 process pumps for tube elements, up to 4 bar

530REM element pumphead for up to 1,500 ml/min

Contact us

To order this product please contact us on:

Telephone: +64 (0)9 273 3166

Fax: +64 (0)9 273 3167

You can also send us an email

Overview
Control
Performance
Drives
Tubing
Take a tour
Brochures
Datasheet
Manual

Overview

530S and SN, 530U and UN, 530Du and DuN, 530Bp and BpN pumps fitted with REM LoadSure tube element pumphead for 2-4 bar operation

530 range of process pumps offer four drive options, colour display and intuitive menu structures provide visual status indication and minimal key presses.

Flow rates up to 1,500 ml/min at 4 bar peak pressure
Industrial integration - manual, remote, Analog and digital communication, plus PROFIBUS
Robust pumphead construction with chemically-resistant polyphenylene sulphide track and rotor, and stainless steel rollers and bearings
Keypad incorporates 3-level security PIN lock
530REM pumphead for use with quick-release industrial or sanitary Tri-Clamp® LoadSure® elements for 2-4 bar operation and one minute maintenance
S, U, Du and Bp pumps are IP31 cased pumps. SN, UN, DuN and BpN are IP66 cased pumps

Control

Pump drives	530SN	530UN	530DuN	530BpN	530S	530U	530Du	530Bp
Manual control
Intuitive keypad and colour display	•	•	•	•	•	•	•	•
Choice of flowrate or speed display	•	•	•	•	•	•	•	•
Full calibration with choice of flow units	•	•	•	•	•	•	•	•
Remote control
Configurable Start/Stop, leak detector and pressure switch input (via contact closure or 5V TTL or 24V industrial logic)		•	•			•	•
Direction change and auto/manual toggle input (via contact closure or 5V TTL or 24V industrial logic)		•	•			•	•
Remote operation of MemDose (foot/hand-switch or logic input)		•	•			•	•
Four configurable digital status outputs through 24V, 30W relays		•	•
Software configurable IP31 outputs						•	•
Analogue speed control
Fully configurable inputs; 0-10V or 4-20mA		•	•			•	•
Analogue outputs; 0-10V, 4-20Ma		•	•			•	•
Keypad / analogue input scaling (replacement of diaphragm pumps)			•				•
Tacho frequency output		•	•			•	•
Digital communication
RS485 network control			•
RS232 network control							•
Fieldbus technology
Profibus DP V0
Communication speeds from 9.6kbit/s up to 12000kbit/s				•				•
Auto detect bus speed				•				•
Security				•				•
3-level PIN lock	•	•	•	•	•	•	•	•

Performance

LoadSure® element tubing flow rates (ml/min)
Tube material	Speed	3.2mm
Marprene TH, Bioprene TH, STA-PURE PCS	0.1 to 220rpm	0.20-450

Drives

Simple-to use HMI requiring minimal key presses to reduce chances of costly errors. Flow proportional to pump speed over 2,200:1 control range. IP31 and IP66 cased pumps for washdown environments.

530S - IP31 and 530SN - IP66 are simple, plug-in and switch on pumps offering economy of ownership. Ultimate process security with a 3 level PIN lock.

530U - IP31 and 530UN - IP66 with all the features of the S/SN models, plus configurable inputs and outputs.

530Du - IP31 and 530DuN - IP66 with configurable inputs and outputs, plus RS232 and RS484.

530Bp - IP31 and 530BpN - IP66 Real time communication makes your process secure and flexible. Bus speed 9.6 kbits/s up to 12000 kbits/s connectivity

Tubing

Please refer to datasheets for materials and sizes of continuous tubing and tube elements for each pumphead model.

Pumpsil platinum cured silicone tubing		Laser-etched part number, lot number and use-by-date accuracy Certification USP Class VI, FDA regulations 21 CFR177.2600 for contact with food -20 °C to 80 °C
Bioprene thermoplastic tubing		Fully approved for food and pharmaceutical applications Low permeability 5 °C to 80 °C
PureWeld		Low internal spallation ADCF -20 °C to 80 °C
Marprene long life process tubing		Exceptional long life Wide chemical compatibility, especially resistant to oxidizing agents 5 °C to 80 °C, up to 7 bar
GORE STA-PURE PCS reinforced silicone tubing		Longest available peristaltic tube life Virtually no spallation -20 °C to 80 °C, to 7 bar
GORE STA-PURE PFL reinforced fluoroelastomer tubing		Extreme chemical resistance 50 times longer life than other fluoroelastomers -20 °C to 80 °C, to 4 bar
Neoprene industrial application tubing		Handles abrasive slurries Up to 2 bar 0 °C to 80 °C