White paper highlights how efficacy, safety or quality of final drug product could be improved through use of post-cured tubing in biopharmaceutical manufacturing

Pumpsil tubing

A white paper that provides evidence of the positive effects of post-curing on the reduction of cyclosiloxane contamination in silicone tubing manufacture has been published by Watson-Marlow Fluid Technology Group (WMFTG).

As a provider of single-use components including world-leading niche peristaltic pump and associated fluid path technologies, WMFTG demonstrates that the post-curing process significantly reduces the presence of cyclosiloxane contaminates in silicone tubing. Thereby, drug manufacturers opting to use post-cured tubing and tube assemblies, will benefit from improvements to the safety of the final drug product.

The data and analysis published in WMFTG’s white paper contains the results of a study which makes comparisons between the semi-volatile extractables profile of post-cured and non post-cured samples of its own Pumpsil platinum-cured silicone tubing.

Essential reading for drug manufacturers

This document offers essential reading for those involved in the manufacture of biopharmaceutical products; many of whom will be concerned about the sources of potential contamination from processing equipment.

According to the report’s author, Sade Mokuolu, Ph.D Group Product Compliance Manager at WMFTG, the scale of this problem is greater than many may assume: “It is interesting to note that 15% of the drug recalls reported by the FDA in the last six months have been due to contamination from processing equipment,” she says.

A primary area of concern is the direct contact of plastic processing materials that comprise single-use components with the drug product. It is widely known that this can result in the presence of compounds may affect the efficacy, safety or quality of the final drug. For manufacturers working on multi-million dollar drug trials and treatments, the implications of this from a product development and brand integrity perspective, are significant.

Extra processing step reduces risks

“Focus must therefore be given to the process used to manufacture equipment and ancillaries. Specifically, the manner in which platinum-cured silicone tubing is manufactured, must be given attention: the process used to manufacture this tubing has the potential to affect the types of leachables which may migrate in to the final product,” says Dr Mokuolu.

At WMFTG, as part of the manufacturing of the Pumpsil silicone tubing, there is an additional post-curing step to the tubing production process. This additional step ensures more cross-linking that not only makes the tubing mechanically stronger, but reduces the semi-volatile compounds.

This extra processing step may not be carried out by other manufacturers of platinum-cured silicone tubing, which means there is a very real risk of cyclosiloxanes migrating into fluids that come into contact with the tubing. This is a major safety concern and one that drug manufacturers must be aware of.

Significant reduction in presence of cyclosiloxanes

The study included in WMFTG’s paper reveals noteworthy results that affirm the need for drug manufacturers to adopt post-cured tubing as standard. The paper details that samples of WMFTG Pumpsil tubing (post-cured and non post-cured) were extracted with a 50% ethanol: 50% water solution for 30 minutes at 25C and seven days at 40C. <<For the purposes of this paper, the extractables studied were the cyclosiloxanes (mixtures of cyclosiloxanes have been of particular interest due to concerns about their potential toxicity).>>

The study demonstrated the presence of cyclosiloxanes was reduced by a minimum of 25% in the post-cured extracts, as compared with non post-cured extracts over a seven day extraction period, and by 50% over a 30 minute time point.

Industry must take note

Dr Mokuolu’s concluding advice to biopharmaceutical manufacturers is clear: “The drug industry must embrace the arguments for post-cured silicone tubing; and this white paper presents some data to support this position. It offers proof that the post-curing of tubing can significantly reduce the amount of cyclosiloxanes that are present after manufacturing. At a commercial and reputational level, this will help the biopharm and drug industry have greater assurance of the efficacy, safety or quality of their final product.”

Available for download

The white paper is entitled ‘A study of the effect of post-curing on the reduction of cyclosiloxane contaminates in biopharmaceutical products’. It is available for download using the button below:

Request a copy of the White Paper

  • Find a product

  • Find a local contact

  • Help and advice

    For help or advice please contact us on:

    Tel: +1 978 658 6168 and Toll free +1 800 282-8823

    You can also send us an email or find your nearest distributor