Overview
Watson-Marlow 521VI/REMC, 521F/REMC, 521P/REMC, 521FX/REMC: 0-2 bar IP55 pumps fitted with LoadSure low-pressure element pumpheads
521 close coupled pumps offer IP55 ingress protection for light industrial environments. They offer rugged, industrial pumping, with all the pumphead features of cased drives, but at the lowest whole-life cost.
- 520REM medium-pressure LoadSure element pumphead features large swept volume with sprung rollers for high accuracy
- Chemically-resistant polyphenylene sulphide track and rotor, and stainless steel rollers and bearings
- Low rotational speeds greatly increase tube life and system reliability
- Clutched rotor for rapid, effortless tube loading
- Rugged, tool-unlockable guard

521VI Varmeca close coupled drives bring 10:1 speed control, constant torque output and total reliability to the industrial environment. The drive offers 230V and 400V three-phase power options, plus 110V and 230V single-phase.
- Varmeca integral inverter offering 10:1 control ratio: 63 rpm, 220 rpm and 275 rpm maximum speeds
- Stop/forward/reverse control and analogue or digital remote control. There is a PROFIBUS option.
521F Fixed speed drives are three-phase powered
- Flow rates from 2.5 ml/min to 4,600 ml/min
- Other speeds are available on request
521FX Duplex fixed speed drives have twin pumpheads allowing two channel pumping
- There is a choice of speeds: 55 rpm and 183 rpm
- Flow rates to 860 ml/min from each channel
- Twin 520R2C pumpheads for balanced flow in two channels
521P Pneumatic, variable speed drives offer 5:1 control ratio. They require a filtered and lubricated 7 bar air supply. An exhaust silencer is fitted and static build-up is prevented by earth bonding.
- High torque, reversible four-vane pneumatic motor
- Variable speed: 5:1, max 257 rpm
- Flow rates from 11 ml/min to 4,100 ml/min
- ATEX II 2G (Zone 1) available on request
Pumphead
REM LoadSure medium-pressure pumphead
- 520REM LoadSure element pumphead offers up to 60 psi (4 bar) pressure and flow rates up to 1,500 ml/min.
Elements are available in Bioprene TM, GORE STA-PURE PCS and GORE STA-PURE PFL with quick-release industrial connectors or world-standard ¾in PVDF sanitary connectors.
REL LoadSure low-pressure pumphead
- 520REL LoadSure tube element pumphead offers up to 30 psi (2 bar) pressure and flow rates up to 3,500 ml/min.
Elements are available in Bioprene TL, Pumpsil, GORE STA-PURE PCS and GORE STA-PURE PFL with quick-release industrial connectors or world-standard ¾in PVDF sanitary connectors.
REH LoadSure high-pressure pumphead
- 520REH LoadSure element pumphead offers up to 100 psi (7 bar) pressure and flow rates up to 1,500 ml/min.
Elements are available in Bioprene TH, Marprene TH and GORE STA-PURE PCS with quick-release industrial connectors or world-standard ¾in PVDF sanitary connectors.
R2 continuous tubing pumphead
- The 520R2 pumphead is designed for continuous tubing with a wall thickness of 2.4mm. It offers up to 30 psi (2 bar) pressure and flow rates from 0.25 ml/min to 4.6 litres/min.
2.4mm wall tubing is avalable in five materials for almost any chemical requirement, in tube sizes from 0.5mm to 9.6mm internal diameter.
R continuous tubing pumphead
- The 520R pumphead is designed for continuous tubing with a wall thickness of 1.6mm. It offers up to 30 psi (2 bar) pressure and flow rates from 0.25 ml/min to 3.0 litres/min.
1.6mm wall tubing is available in eight materials for almost any chemical requirement, in tube sizes from 0.5mm to 8.0mm internal diameter.
Drives
Close coupled drives offer rugged, industrial, quality pumping, with all the pumphead features of cased drives, but at the lowest possible whole life ownership cost.
- Varmeca close coupled drives bring 10:1 speed control, constant torque output and total reliability to the industrial environment. The drive offers 230V and 400V three-phase power options, plus 110V and 230V single-phase
- Fixed speed drives are three-phase powered. There is a standard choice of speeds, and others are available
Manual download
521F/REMC, 521P/REMC, 521VI/REMC, 521FX/REMC
