Why we outperform diaphragm pumps

Air-operated diaphragm pumps require a compressed air supply to drive them. If this does not already exist it can be very expensive to install. Even the best-maintained air supply systems are inefficient with at least 30% air leakage. The energy costs of supplying air for an air operated diaphragm pumps are much higher than for a Watson-Marlow peristaltic pump.

Air pressure limits the discharge pressure – it just stops pumping beyond its limits.

Changing pumped fluid is complex as cleaning an air-operated diaphragm pump is difficult – often requiring a complete strip-down. Watson-Marlow LoadSure pumps offer one-minute maintenance with pumping elements. Change the tube, create a new pump.

A diaphragm failure can result in pumped fluid escaping uncontrolled through the air vent ports. Watson-Marlow LoadSure pumps have fluid management with leak detection and controlled waste drain.

The difficulty in accurately controlling air supply makes the air operated diaphragm a poor choice for metering duties.

Even double diaphragm pumps have a high level of pulsation.

As with all diaphragm pumps, air operated diaphragm's rely on ball valves. These do not work well unless there is positive back pressure to close them between cycles. They are prone to abrasive wear and can clog with crystals, fibres or solidifying fluids such as inks.

While the initial purchase cost is lower, Value for life costs are much higher due to energy and maintenance costs.

Watson-Marlow peristaltic pumps win on all counts:

Find out more about the Watson-Marlow range

  • Find a product

  • Find a local contact

  • Help and advice

    For help or advice please contact us on:

    Tel: +1 978 658 6168 and Toll free +1 800 282-8823

    You can also send us an email or find your nearest distributor