Overview
The Bio Tube Applicator tube to hose barb assembly machine allows effortless insertion of connectors into a wide variety of tubing, including silicone and thermoplastic elastomers. Union of the tube and connectors is completed without damage to the internal bore of the tube, and importantly, without lubrication such as IPA. Providing a repeatable process, this aids cGMP compliance and validation procedures. The presence of IPA in the fluid path is a growing concern in bioprocessing, so avoiding its use simplifies validation.
- Increase quality and productivity. Automating your tube to hose barb assembly provides repeatability not available with manual processes, thus increasing quality and reducing the risk of junction failures, especially in higher pressure downstream bioprocessing. Automation can also boost productivity and streamline your workflow
- Improve safety. Advanced features that can replicate a manual assembly process ensure that even the most complex application can be transferred to the Bio Tube Applicator. Improving safety in the assembly process, the Bio Tube Applicator removes risk of operator error and health risks associated with RSI
- Add flexibility. Utilising different combinations of change parts, a wide range of applications can be achieved. Each Bio Tube Applicator is performance tested for over 20,000 cycles, ensuring that the machine is to specification and meets the needs of your bioprocess assembly operation.
Features
Increase quality and productivity
Automating your tube to hose barb assembly provides repeatability not available with manual processes, thus increasing quality and reducing the risk of junction failures, especially in higher pressure downstream bioprocessing. Automation can also boost productivity and streamline your workflow
Improve safety
Advanced features that can replicate a manual assembly process ensure that even the most complex application can be transferred to the Bio Tube Applicator. Improving safety in the assembly process, the Bio Tube Applicator removes risk of operator error and health risks associated with RSI
Add flexibility
Utilising different combinations of change parts, a wide range of applications can be achieved.
Change parts
The change parts can be interchanged within 30 seconds and do not require tooling. Application videos are available which demonstrate the operation of the Bio Tube Applicator and its use to solve a variety of applications.
By utilising change parts we guarantee a repeatable process to ensure every connection is the same as the last. This not only improves production efficacy, but provides a base for validation and aids compliance to cGMP.
Specification


1 |
Automatic shut down safety cover |
2 |
Tube Support |
3 |
Jaws |
4 |
Cradle |
5 |
Two button activiation |
6 |
Ergonomical, lightweight design including carry handles |
7 |
Pressure Gauage |
8 |
Air Vent Exhaust: Fitted with exhaust filter that meets the requirements for use within ISO Class 4 clean room |
9 |
Air Inlet |
10 |
Power inlet |
11 |
Pecking Dial: Can be adjusted to ensure a precise replication of the manual assembly process is achieved. |
Model Number
|
BTA125/625 |
Tubing/Component Size Compatibility |
1/8” - 1” |
Main Feed, Electrical Supply |
100 - 120V / 220-240V AC 50/60Hz |
Control, Electrical Supply |
24V DC |
Fuse Rating |
5 amps |
Compressed Air Pressure |
73 - 87psi |
Working Temperature |
41F - 104F |
Storage Temperature |
-40F - 158F |
Weight |
40.7lbs |
Dimensions |
8.66in (H) x 17.32in (W) x 21.26in (L) |