Skip to main content
Skip to site navigation

You are here: Home > Products > ASEPCO diaphragm valves > Aseptic connectors > ASEPCONNECT inline

ASEPCONNECT™ inline connector

ASEPCO

Alternatives to hygienic clamps and Ingold ports

Contact us

To order this product please contact us on:

Tel: +27 11 796 2960

Fax: +27 11 794 1250

You can also send us an email or find your nearest distributor

Overview
Specifications

Overview

ASEPCONNECT™ inline connector

ASEPCO Inline Connector

Clean, aseptic design for use in critical aseptic processing applications
Patented sealing face improves gasket sealing edge to eliminate leakage
Easy to place, seal, and inspect, thereby lowering maintenance costs
Seamless design eliminates dead legs and joint leakage
Monel studs prevent galling during maintenance
Clearance slots for use with rupture disks
Optional integrated valve allows for easy sterilisation

Specifications

ASEPCONNECT inline connector specifications

Material	316L, AL6XN, Hastelloy
Surface Finish	Max 20 micro-inch Ra (0.5 μm Ra), Electropolished, Max 15 micro-inch Ra (0.375 μm Ra), Electropolished, Max 10 micro-inch Ra (0.25 μm Ra), Electropolished
Sizes	1.5" and 2" standard; other sizes are available on request
Connection	Tri-clamp component connection
Design Pressure	-14.5 to 101.5 psig (Maximum working pressure is determined by the design pressure of the gasket being used in the assembly.)
Design Temperature	-80 to 200°C (Maximum working temperature is determined by the design pressure of the gasket being used in the assembly.)
Marking	Each connector is marked for full material traceability
ISO	All product and procedures are governed by our ISO Quality Assurance Program
Standards	BPE, CE-PED, ASME

Contact us

To order this product please contact us on:

Tel: +27 11 796 2960

Fax: +27 11 794 1250

You can also send us an email or find your nearest distributor