Process pump for tube elements

Manual, analog, digital or fieldbus control

Manual, analog, digital or fieldbus control

Flow rates to 33 litre/8.8 USGPM minute

Flow rates to 33 litre/8.8 USGPM minute

One minute maintenance transfer pumps

One minute maintenance transfer pumps

Contact us


To order this product please contact us on:

Tel: +27 11 796 2960

Fax: +27 11 794 1250

You can also send us an email or find your nearest distributor

Overview

730SN, 730UN, 730DuN and 730BpN peristaltic process pumps fitted with LoadSure tube element pumpheads

Control

Functionality 720SN 720UN 720DuN 720US 720DuS

Enclosure - ingress protection rating
NEMA 4X NEMA 4X

NEMA 4X

NEMA 4X

NEMA 4X


Manual control
         

Keypad speed control with simple calibration to display flow
  •   •  •   •   •
 Comprehensive calibration for flow rate display; metric or imperial units       •     •
 Numeric keypad for entry of speed, flow or PIN code       •     •
 Cumulative volume indication       •     •
 Remote control          

Run/stop, direction change, auto/manual mode, leak detector input (via contact closure or 5V TTL to 24V industrial logic
    •   •  110VAC   110VAC

Remote operation of MemoDose (foot/hand-switch or logic input
   •  •  110VAC  110VAC

Four programmable digital status outputs through 24V, 30W relay
   •  •  110VAC  110VAC

Analog speed control
         

Software programmable inputs; 0-10V, 1-5V or 4-20mA
   •  •  •  •
 Analog outputs; 0-10V (8 bit resolution)    •    •  
 Analog outputs; 0-10V, 4-20mA (8 bit resolution)      •    •
 Keypad/analog input scaling (replacement of diaphragm pumps)      •    •

Frequency output; 0-768Hz
     •    
 RS485 digital communication          

Digital network serial control
     •  

 •

 Security          
Basic security code to protect set-up    •    •  
 Dual operator/supervisor PIN code protection of pump settings      •    •

Performance

    Tube bore and flow rates (litre/hr)
  Speed rpm 12.7mm  15.9mm 19.0mm 25.4mm
720RE 0.1-360 0.22-780  0.30-1100 0.42-1500 0.56-2000

Pumpheads

720RE and 720REX LoadSure tubing element pumpheads

Elements are available in Pumpsil platinum-cured silicone, Bioprene and STA-PURE PCS for sanitary applications; and in Marprene, Pumpsil and Neoprene

 

720R and 720RX continuous tubing pumpheads

Tubing is available in five materials for almost any chemical requirement.

Drives

These cased pump drives offer NEMA 4X (IP66) ingress protection for industrial and washdown environments. 

720SN is a simple, pump offering ultimate economy of ownership, with calibration and one-key manual control via a large-key membrane keypad. MemoDose provides single shot dosing

720UN is a keypad control or remote control pump with analogue speed inputs and status outputs. Software-configurable with password protection

720DuN is a sophisticated process pump with RS485 and full industrial connectivity, and process control through PC, PLC or other plant controller. Comprehensive calibration is available. Twin analogue inputs allow scaled flow adjustment. A 16-key numeric keypad with dial up flow rate or speed.

Download datasheet

720RE NEMA 4X IP66   720RE NEMA 4X IP66 PROFIBUS

720 REX                720RE                Profibus

Manual download

720SN/RE and 720UN/RE: IP66    720DuN/RE IP66

720SN/RE IP66                               720DuN/RE IP66

PROFIBUS

No point-to-point wiring and a simple 9-pin PROFIBUS D-connector provides:

PROFIBUSProfibus GSD control file

Tubing and hoses for your industry

  • Contact us

    To order this product please contact us on:

    Tel: +27 11 796 2960

    Fax: +27 11 794 1250

    You can also send us an email or find your nearest distributor