630 Process pumps for tube elements up to 4 bar

630RE twin roller pumphead for LoadSure elements

630RE twin roller pumphead for LoadSure elements

Colour display and intuitive menu structures

Colour display and intuitive menu structures

Flow rates from 0.004 L/min to 19 L/min

Flow rates from 0.004 L/min to 19 L/min

Contact us

To order this product please contact us on:

Tel: +27 11 796 2960

Fax: +27 11 794 1250

You can also send us an email or find your nearest distributor

Overview

Datasheet

Datasheet

Download now

630S and SN, 630U and UN, 630Du and DuN, 630Bp and BpN peristaltic process pumps fitted with RE LoadSure element pumphead for 4 bar operation.

Control

Pump drives 630SN 630UN 630DuN 630BpN 630S 630U 630Du 630Bp
Manual control                
Intuitive keypad and colour display
Choice of flowrate or speed display
Full calibration with choice of flow units • 
Remote control                
Configurable Start/Stop, leak detector and pressure switch input (via contact closure or 5V TTL or 24V industrial logic)        
Direction change and auto/manual toggle input (via contact closure or 5V TTL or 24V industrial logic)        
Remote operation of MemDose (foot/hand-switch or logic input)        
Four configurable digital status outputs through 24V, 30W relays            
Software configurable IP31 outputs            
Analogue speed control                
Fully configurable inputs; 0-10V or 4-20mA        
Analogue outputs; 0-10V, 4-20Ma        
Keypad / analogue input scaling (replacement of diaphragm pumps)            
Tacho frequency output; 0-1478Hz        
Digital communication                
RS485 network control              
RS232 network control              
Fieldbus technology                
Profibus DP V0                
Communication speeds from 9.6kbit/s up to 12000kbit/s            
Auto detect bus speed            
Security            
3-level PIN lock

Performance

Flow ranges (l/min) LoadSure element tubing
  620RE (2 rollers) 620RE4 (4 rollers)
Tubuing material, tubing bore (mm) 12mm 17mm 12mm 17mm
Marprene TM, Bioprene TM 0.004-9.8 0.001-16 0.003-8.3 0.004-11
Marprene TL, Bioprene TL 0.004-9.8 0.001-18 0.003-8.3 0.005-12
Pumpsil® silicone 0.004-10 0.001-16 0.003-8.7 0.004-11
GORE STA-PURE PCS™, GORE STA-PURE PFL™, Neoprene 0.004-11 0.001-18 0.003-9.0

0.010-13

Pumphead

 620RE LoadSure tube element pumphead

620RE4 LoadSure tube element pumphead

 620R continuous tubing pumphead

620L low pulsation pumphead

Drives

Tubing

Please refer to datasheets for materials and sizes of continuous tubing and tube elements for each pumphead model.

Pumpsil platinum cured silicone tubing

Pumpsil platinum-cured silicone tubing

Bioprene thermoplastic tubing Bioprene industrial grade tubing

 

PureWeld

Watson-Marlow tubing - PureWeld

 
Marprene long life process tubing Marprene industrial grade thermoplastic elastomer tubing

 

GORE STA-PURE PCS reinforced silicone tubing GORE STA-PURE PCS pump tubing

 

GORE STA-PURE PFL reinforced fluoroelastomer tubing GORE STA-PURE PFL pump tubing

 

Neoprene industrial application tubing Neoprene tubing elements

 




Datasheet

Tubing and hoses for your industry

  • Contact us

    To order this product please contact us on:

    Tel: +27 11 796 2960

    Fax: +27 11 794 1250

    You can also send us an email or find your nearest distributor